How to connect two different networks wirelessly by using back trcer?

Please explain "back trcer" first.

I think you might mean "tracert", but this is simply a utility used primarily to troubleshoot connections.

Quote:

---

Originally Posted by Scleros

Please explain "back trcer" first.

---

Sorry I mean packet tracer. Packet tracer is program which allow you to design any types of network. For example connect two networks by using logical devices instead of used physical devices.

How connect two different networks wirelessly by using packet tracer program?? :)

Hi,

I think in packet tracer to connect two different network wirelessly you have to use a router and two access point with different IP address configured on them.

Hope this will help!!


Regards,
Naim

If you are referring to Cisco Packet Tracer, this is an educational tool for simulating networks. If you are referring to a different networking tool such as a packet analyzer, then it is only that... a tool. They do not make network connections or replace any other basic network connections that would be supported by your operating systems.

If you have information about packet tracer can sent it to me please...

Hi,

You mean for Cicso Packet Tracer software!!


/Naim

Quote:

---

Originally Posted by naimlatifi

Hi,

You mean for Cicso Packet Tracer software !!!!!


/Naim

---

Yes...

Cisco Packet Tracer is available free from Cisco to certified Cisco Network Engineers only. Once certified, you would obtain a logon for access.

Hi,

Go to the web site below :

Cisco Packet Tracer 5 » Download Free Computer Ebooks - NET BOOKS

Hope will help!!


Naim