I have a Kenmore 110.86870100 electric dryer. It won't heat and dry. We have already changed the heat element as it was bad (broken wires) but it still won't heat up, not sure what else to check.

del_shel_gar- When you put the new heating element in , was you careful not to bend it to where it is now ( GROUNDING OUT) Touching the duct ,somehow? NOW DID you CHECK the OVER Heart PROTECTORS TO SEE IF THEY WERE GOOD? YOU MAY HAVE TO CHECK IT ALL OUT O FIND THE PROBLEM;;#1
THERMOSTAT;; #2defective timer::#3START SWITCH::#4 FAULTY OVER HEAT PROTEC TORS::#5CLOOGED LINT SCREEN:;#6 Have you checked to make sure that you have 220 volts comeing in ( CHECK BREAKERS OR SCREW IN FUSES) IF you hsave a VOLT_OHM
Meter, I could lead you through the steps to test everything;; Let me know :: Have a great day
AND GOD BLESS:: F.B.E.