I have a 20+ Kenmore dryer that I inherited from my mom about 13 years ago. It worked fine up until this week - I've replaced the belt for the drum about a year ago but now it's just blowing cold air. I *think* but am not positive it's an electric only dryer - the model # is: 96282100/62821 but I can't find ANYTHING about it online! I'm hoping that I just need to clear the outside vent (it's been in the same place for 7 years this year and I've never cleared the vent) but I don't know and want to make sure I'm doing it right first. Any assistance with this would be appreciated because due to the economic downturn we just can't afford a new dry or a service call right now. I'm sure I can fix it if I have the right information available.

Thank you,
Christine

If it is electric start by checking the elements inside the unit. If it is a gas unit check the sparker down near the gas burner. I have no info on that older model but you might check sears parts online to see if they have any diagrams.

CMM123- CHRISTine - ( GO DOWN TO THE post by ( ROBIVEN ) clos to bottom right now
I just gave her the way to test everything -step by step, AND if you unplug the dryer before you do any testing you will not have to worry sabout any schooks, SHE HAS DRYER PROBLEMS ALSO :: HAVE A GREAT DAY AND GOD BLESS:: IF YOU STIOLL NEED HELP JUST COME BACK SAND HOLLER:: F.B.E.

Quote:

---

Originally Posted by Flying Blue Eagle

CMM123- CHRISTine - ( GO DOWN TO THE post by ( ROBIVEN ) clos to bottom right now
I just gave her the way to test everything -step by step, AND if you unplug the dryer befor you do any testing you will not have to worry sabout any schooks, SHE HAS DRYER PROBLEMS ALSO :: HAVE A GREAT DAY AND GOD BLESS:: IF YOU STIOLL NEED HELP JUST COME BACK SAND HOLLER:: F.B.E.

---

Stop yelling!!