Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Plumbing (https://www.askmehelpdesk.com/forumdisplay.php?f=259)
-   -   Garbage Disposal question (https://www.askmehelpdesk.com/showthread.php?t=30516)

  • Jul 30, 2006, 12:40 PM
    Sueh
    Garbage Disposal question
    I can't seem to figure out what the problem is. When I flip the switch there is a humming noise so I know that it is getting power but it won't turn. I used the hex wrench & I also used a short handle stick and it spins both ways so there doesn't seem to be blocked but it won't work when I flip the switch. Any ideas?
  • Jul 30, 2006, 02:58 PM
    speedball1
    Quote:

    Originally Posted by Sueh
    I can't seem to figure out what the problem is. When I flip the switch there is a humming noise so I know that it is getting power but it won't turn. I used the hex wrench & I also used a short handle stick and it spins both ways so there doesn't seem to be blocked but it won't work when I flip the switch. Any ideas?

    Hey sue,
    Yes. If the table turns freely the that would indicate a short in the motor windings and the unit needs to be replaced. The easiest way will be to buy a unit the same as the one being replaced. That way you can keep the old drain and locking assembly in place and not have the hassle of installing a new one. All you'll have to do is snap the new disposal in place and plug it in.
    Good luck, Tom
  • Jul 30, 2006, 04:11 PM
    Sueh
    Thanks for your help!

  • All times are GMT -7. The time now is 01:33 PM.