Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Tools & Power Equipment (https://www.askmehelpdesk.com/forumdisplay.php?f=334)
-   -   Craftsman snowblower utility light (https://www.askmehelpdesk.com/showthread.php?t=302694)

  • Jan 12, 2009, 04:50 PM
    Gedunkman
    Craftsman snowblower utility light
    I would like to install a utility light on my snowblower. But after reading the comments about the light, I read that the light bulb burns out after two hours. So my question is, can I rig up a car fog light to the snowblower, off the utility light plug? And if so how would you do it?

    Thanks

    Gedunkman
  • Jan 11, 2010, 09:39 PM
    Greg Songer
    I bought one of the kits, my light burned out, and I couldn't find an exact replacement. However, a 12v 55w H3 bulb from a car driving light fits perfectly. The filament is thicker so it doesn't put out as much light but it should last a heck of a lot longer and was only six bucks.
  • Jan 12, 2010, 07:19 AM
    crigby

    Hi,
    For a number of years I have had people get me to mount halogen driving light kits on to their zero-turn mowers for use at and after dusk during the autumn leaf season. We just used NAPA kits at about $30 and in your case you would have a spare.
    Peace,
    Clarke

  • All times are GMT -7. The time now is 09:19 PM.