Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Electrical & Lighting (https://www.askmehelpdesk.com/forumdisplay.php?f=105)
-   -   Light will not work on a ceiling fan (https://www.askmehelpdesk.com/showthread.php?t=301719)

  • Jan 10, 2009, 11:13 AM
    senorman
    Light will not work on a ceiling fan
    I have a Hampton Bay ceiling fan that contains three light bulbs. I do not know the age as it was in the house when we moved in two years ago. Both the fan and light are operated by dimmer switches on the wall. Yesterday when I went to turn on the light, the bulbs flickered on and then went off. This happened every time I tried to turn on the light. The fan still works properly. I am wondering if this problem can be corrected or if I will need to purchase a new ceiling fan. Thank you!
  • Jan 11, 2009, 03:48 PM
    ducsauce

    Could be a bad dimmer switch. Take that dimmer switch out the box and touch the wire coming from the fan's light to a known hot wire in the box. If it comes on then you know you have a bad switch. Just be careful.
  • Jan 11, 2009, 06:01 PM
    ballengerb1

    The most likely problem is a loose connection at either the switch or the light fixture. Open up the boxes and tighten all connections. Put a test lead on the black wire at the fixture and ground your meter, tell us what reading you get when someone turns on the light.
  • Jan 12, 2009, 09:53 PM
    ceilingfanrepair

    Is it a remote wall switch with a lot of buttons, or two different switches, a basic dimmer for the light?

    If the latter it is probably a bad switch, easy to replace.

    If it's not the switch, check all the wiring from the switch to the light. A voltmeter can help.

    See:

    http://www.ceiling-fans-n-more.com/c...ng-and-FAQ.php
  • Jan 25, 2009, 09:20 AM
    senorman
    Sorry for the slow response. Today is the first day I've had the opportunity to take down the box and test the wires. The volt tester lights up for both the fan and the light. Unfortunately I don't have anything to get a reading. So, I guess I'll try buying a new dimmer box and see if that solves the problem. Thanks for your help!
  • Jan 25, 2009, 09:39 AM
    ballengerb1

    If you opened the switch box and can't get a reading at all don't bother buying a new switch, check the breaker. Power must first reach the switch box for the switch to do anything.
  • Jan 26, 2009, 02:19 PM
    senorman
    I don't think I was very clear on not being able to get a reading. As you can tell, this terminology is really my forte! We replaced the dimmer switch and that has solved our problems. Thank you all for the feedback. It is very much appreciated!
  • Jan 26, 2009, 08:44 PM
    ceilingfanrepair

    Glad you got it working.

  • All times are GMT -7. The time now is 03:39 PM.