My speedo won't work, whole gauge cluster messed up, please help

Check fuses. See if any wires are burned.

The fuses are all fine, couldn't find any burnt wires. Is there any thing else it could be?

It might be ECM failure, since it doesn't appear to be related to just one sensor. Another possibility is that the whole instrumentation panel needs to be removed and replaced. Probably more than what you want to get involved with. I'd recommend taking it to a Honda dealer.

I am having the same problem... HELP ANYONE?

First off check your vehicle speed sensor, VSS, on the trans.

With ignition ON, check voltage on both test points on under-dash ACG(S) fuse No. 24. If there is no voltage going through the ACG(S) fuse, test/replace the ignition switch and harness going to the under-dash fuse/relay box.

Thank you for your help , it was the speed sensor, and the gauges themselves. All works now

I'm haven the same problem,when I take my gauge cluster outt and put it in somebody else's honda it works