I have a Murray 5/24 snowblower. It will not move forward or back. What do I do?
![]() |
I have a Murray 5/24 snowblower. It will not move forward or back. What do I do?
Check for loose rod linkage from the Handel lever to the Transmission and how that lever is going to the trans You probably did this but play with the "neutral" postilion location
Signed 21 Boat
If I helped to Answer Your Question Please Rate My Answer
Hi jlaz2005,
If your linkage is OK check your drive disc. In my experience it is the most common problem as the rubber wears off the disc and then has to be replaced. Hope this helped.
Mike
8 HP 24" cut Agway Snowthrower about 20 years old. I have a wire hanging with a white plastic clip any ideas where it belongs?
Hi JoAnneButler911,
That wire may be from the alternator to run lights.
Mike
All times are GMT -7. The time now is 11:50 PM. |