Hello,
Im trying to get some information on wiring up a lipo batt charger to ac power.
Just want to confirm if my diagram will work or if I need to do it diff way.
Thanks
[IMG]http://img211.imageshack.us/img211/8...ingcopycu3.jpg[/IMG]

Concerns:

• I'd probably look for an AC adapter with a larger current rating just to be safe.
• The polarity needs to be correct when wiring to the charger.
• The lower + connection feeding the hot glue blob (LED?) would see ~4.5V when using batteries. As shown, you'll be feeding it 6V. Can the hot glue blob tolerate 6V?

Might also have KeepItSimpleStupid or Donf from the electronics forum take a look.