Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Crafts (https://www.askmehelpdesk.com/forumdisplay.php?f=83)
-   -   Stitches won't stay tight (https://www.askmehelpdesk.com/showthread.php?t=295908)

  • Dec 26, 2008, 04:02 PM
    lemonlime
    Stitches won't stay tight
    Hey I have a Euro Pro X Model # 9120 sewing machine, the stitches won't stay tight even after turning the tensioner knob on top. We also sent it out for repair and maintenance,after a few dresses the problem appeared again. Any Advice?PS the machine is only about two years old!
  • Dec 26, 2008, 06:13 PM
    KISS

    Post a pic using "go advanced". I'd like to see how it's threaded. If you can tell me if it's the top or the bottom stitch that's loose.

    I suspect it's not threaded quite right.
  • Dec 26, 2008, 10:33 PM
    lemonlime
    Quote:

    Originally Posted by KeepItSimpleStupid View Post
    Post a pic using "go advanced". I'd like to see how it's threaded. If you can tell me if it's the top or the bottom stitch that's loose.

    I suspect it's not threaded quite right.

    Bottom stitch is loose
  • Dec 26, 2008, 10:42 PM
    lemonlime
    Wifey says bottom stitch is loose!
  • Dec 26, 2008, 10:47 PM
    lemonlime
    Wifey said it's the bottom stitch!
  • Dec 28, 2008, 10:34 PM
    polly123

    The bobbin also has a tension. Take the bobbin housing out and find the tiny screw on it and tighten just a little until the thread pulls tighter.

  • All times are GMT -7. The time now is 12:58 AM.