Hello,

Does anyone know of a dealer or person that may have parts available?

Specifically I need the auger drive belt that works the snowblower attachment, Honda part# 80545750880... 167" long V belt.

OR is there a way to make one combining shorter belts?

Tc

Hi,
You are part of the way "home" in that you know the length. Now you need to find out the type of measurement and the cross sectional dimension.
The type of measurement will be where that length was measured. Choices are the outside circumferemce, the "center" or the inside circumference. The designations are A, B or L.
The cross sectional dimension is the thickness(size) and generally will be 1/2" or 5/8" for your application. The two bits of information are kind of interlocking as they will be built into the belt part number. For instance, a generic Gates belt could be : 5L1670 for a 5/8" belt of the length you say. This NOT a belt to look for as it will not give good service.
You will want a Kevlar belt of your needed length and do not pass out when you here the price, they are not cheap! The Honda belt will not be either, if you can find it.
As far as making two from one, NO it will have no strength.
Peace,
Clarke

Clarke,

Thanks for your answer... I found some more info...

Looks like the part number I have been using was incorrect...

Honda V-BELT (167")
V-BELT (167")

Honda Part Number Variations
80545-750-881
80545 750 881
80545750881
8054 5750881
80545 750881
8 05457 50881
805 4575 0881
80 545 750 881
8 05 45 75 08 81

Still looking for the other dimensions... If anyone has a tip on a location to buy from PLEASE let me know.

Tc

Never Mind the part# ending 0881... 0880 is correct

Tc

Hi,
Lots of that stuff you can still look up at one of Honda's sites; the power equipment site. As for wher to buy, try the power equipment parts distributors like Sunbelt, Dixie, Stens, Rotary. Be sure to specifiy the Kevlar belt, you will not like your results otherwise even though you will save a "dollar" you will not get any service life. For Dixie use dixiesales.com otherwise just build a URL with the others in the middle.
Peace,
Clarke

Looked into lots of possibilities, very pricy. Found Grainger's web site, they offer a bunch of belts, not kevlar but my belt snapped two days ago and I can't wait. Closest I could get was a 165" 5/8 x 13/32. W & H are almost perfect match, I can deal with the 2" shorter with the tension adjusters - cost me $80 shipping included.

Quote:

---

Originally Posted by crigby

Hi,
Lots of that stuff you can still look up at one of Honda's sites; the power equipment site. As for wher to buy, try the power equipment parts distributors like Sunbelt, Dixie, Stens, Rotary. Be sure to specifiy the Kevlar belt, you will not like your results otherwise even though you will save a "dollar" you will not get any service life. For Dixie use dixiesales.com otherwise just build a URL with the others in the middle.
Peace,
Clarke

---

Honda's web site was useless for this model lawn tractor. Even called them and they offered no sub item nor could they direct me to any distributor that might have what I needed. Dixie won't let you browse parts without siging up - they get my info before I know if they can help??

Thanks for your suggestions, kept me looking. Found Jacks Small Engine Repair and Boats.net - both carry parts, spec drawings... very helpful for HT3810.. esp boats

Tc

Quote:

---

Originally Posted by Tentcamp

Looked into lots of possiblities, very pricy. Found Grainger's web site, they offer a bunch of belts, not kevlar but my belt snapped two days ago and I can't wait. Closest I could get was a 165" 5/8 x 13/32. W & H are almost perfect match, I can deal with the 2" shorter with the tension adjusters - cost me $80 shipping included.

---

I need that same belt what's the part number at Grainger's ? And did it work.