How do you change glow plugs on a 1999 Ford Superduty.

Removal and installation. With the engine "stone cold," disconnect batteries, remove valve cover, disconnect glow plug connector, remove glow plug with a 10 mm deep socket, install new glow plug (torque to 13 ft.-lbs.), and reattach connector. After finishing the remaining 3 glow plugs on that bank, clean valve cover, install new gasket, and reinstall valve cover (torque to 97 in.-lbs.). Do the same thing for the other bank of glow plugs and reconnect batteries. Not a difficult job--should take several hours.