I have added a 220 stove to a house that I want to rent. I ran the electrical wire correctly from the pannel box to the new stove. I bought a new 50amp breaker for the pannel box but only the light's turn on at the stove. I had the stove checked and it is in perfect condition, it's new. The folk's at the store told me that the stove is not recieviing the full current to heat up the element's in the stove. The pannel box is a small older box that only hold's about 12 breaker's. What do you think I am doing wrong at the pannel box? My direct e-mail is [email protected]. Thank you.

Have the landlord call an electrician to do this work. You should NOT be touching anything electrical in a rented space.

Stan, I think he owns it and wants to rent it to someone else.

As for the question, I think you should call an electrician since it is more than just your property at risk.

Quote:

---

Originally Posted by Tev

Stan, I think he owns it and wants to rent it to someone else.

As for the question, I think you should call an electrician since it is more than just your property at risk.

---

I think you may be right. I read it the other way. :confused: