Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Appliances (https://www.askmehelpdesk.com/forumdisplay.php?f=157)
-   -   Replacing kenmore dishwasher motor (https://www.askmehelpdesk.com/showthread.php?t=293336)

  • Dec 17, 2008, 03:52 PM
    gwhill25
    Replacing kenmore dishwasher motor
    If my motor has gotten wet and cannot be saved, how hard is it to replace the motor? My house air conditioner motor went out recently and it was fairly easy to replace myself, and much cheaper than the AC repair guy led me to believe it should be. All I had to do was take the motor out and take it to my local Motor Works shop, and they sold me a brand new one. Can I do the same thing with my DW motor?
  • Dec 18, 2008, 08:17 AM
    hvac1000
    Most new motors come in a kit with new gaskets/seals. The job will be a bit more difficult due to lack of room under the unit. You will need new gaskets and seals for your unit since you never use the water sealing gaskets a second time or you will be doing the job all over again since the old gaskets will leak.

  • All times are GMT -7. The time now is 11:07 PM.