Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Heating & Air Conditioning (https://www.askmehelpdesk.com/forumdisplay.php?f=150)
-   -   Visionpro8000 TH8320U1008 for York heat pump (https://www.askmehelpdesk.com/showthread.php?t=292343)

  • Dec 15, 2008, 08:18 AM
    rvalli
    Visionpro8000 TH8320U1008 for York heat pump
    Hi
    I have York Stealth electric heat pump. It needs 3heat/2cool settings thermostat. I bought Honeywell Visionpro 8000 TH8320U1008 thermostat. I wired this like below-

    Y2-Brown
    L-Blue
    E-White


    RE, R (jumper together) - Red
    O/B - Orange
    Y-Yellow
    G-green
    C-Black

    I could not find any wire for AUX to connect. System is working fine, but it is too loud in the air handler area. Need help. Did I wired right?

    Thanks in advance.
  • Dec 15, 2008, 01:07 PM
    hvac1000
    The thermostat will not control how loud the furnace is. It sounds like the fan might be running the wrong speed.
  • Dec 15, 2008, 02:07 PM
    rvalli
    But it was running fine before I installed this thermostat. Some kind of little bit loud fan noice coming from the handler.

    Last week my compressor blown out, since the system is only 5 yrs old the part is free but the labor is a bundle to handle.

    Do you think my wiring is right?
  • Dec 15, 2008, 02:56 PM
    KISS

    The wiring of the tstat can't affect it.

    Put the HP on fan and start listening.

    Don't know the furnace, but could you have bumped a DIP switch or something. Something that could change the fan speed.

  • All times are GMT -7. The time now is 05:43 AM.