Hello,
Having trouble removing the brake light bulb from the socket on a 2005. I've gotten to the socket with a 1/4 turn but the bulb looks like it's locked in with 4 small plastic pins, (2 on each side with a wedge hook).

Do I need a special tool? Any help most appreciated.

Syvania 3057 Bulb. Double filament

3057? No turn! Just wiggle and pull hard.

Kitch,
Hey there. I saw one of your post from MAy 2007 on a similar question. The bulb is mounted to a black plastic base in the socket. I see those pins down there against the side of the base. You sure??

Yes, I'm sure. Don't worry about the pins.

Kitch,
Will do. Thanks a lot.