Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Plumbing (https://www.askmehelpdesk.com/forumdisplay.php?f=259)
-   -   Removing Tub Spout (https://www.askmehelpdesk.com/showthread.php?t=286718)

  • Nov 30, 2008, 08:33 AM
    histeveaskme
    Removing Tub Spout

    Hey Gooseproints, I am having the same problem removing the tub spout.
    There is a cutoff at the bottom, but I cannot find any set screw. I see the plastic "X". I can turn the spout counter-clockwise, but it just turn without moving out. I would not turn clockwise, only counter-clockwise. I try to apply some pressure to pull it, but without success either.
    How did you get yours out?
    [email protected]
  • Nov 30, 2008, 10:33 AM
    Milo Dolezal

    Histeveaskme: this is post from 2006... Start new thread...

    Anyway, there is a small set screw. It may be hard to find but you have to be patient. Use long (loose) allen wrench, not the one that comes bundled in small handle-like tool. You will have better average. Also make sure you use right size allen wrench.
  • Nov 30, 2008, 05:32 PM
    afaroo
    1 Attachment(s)

    See the Image below this what Milo is talking about, good luck.

    John

  • All times are GMT -7. The time now is 12:52 PM.