I am getting limited or no connectivity error message on lan icon.
These are solutions that I tried:
Solution:
a)
- click on start-->run type cmd.Hit enter .ipconfig /release -> Enter

- click on start-->run type cmd.Hit enter .Type ipconfig /renew -> Enter

- click on start-->run type " netsh int ip reset c:\tcpipreset.txt " -> Enter

- Restart the system

- Ask user to check

b)
- click on start -->run type " netsh winsock reset catalog " -> Enter.

- Restart the system

This should resolve the issue


c)
- Uninstall Network Adapter from My Computer -> Properties -> Hardware -> Device manager -> Network Adapter

- Restart the system

d)replugged and unplugged the lan cable

I am still facing the same issue.Please suggest some other solutions.

Couple things... When renewing IP from ipconfig /renew, are you getting 169.xxx.xxx.xxx? That can mean that something is not communicating correctly.

Are you trying to connect through a router, hub or switch? If so, have you tried powering down the device for 1 minute? Have you tried different ports on the device? Have you tried another unit? Have you tried the mfg reset?

Have you tried different network cables? Perhaps one has a slight break or the connector is working it self loose?

Have you tried a different network card or adapter?

Does another computer work in it place?