Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Plumbing (https://www.askmehelpdesk.com/forumdisplay.php?f=259)
-   -   Can't get faucet apart (https://www.askmehelpdesk.com/showthread.php?t=285209)

  • Nov 25, 2008, 04:34 PM
    freeflowin
    Can't get faucet apart
    I have a drip on the hot side of my Delta faucet. It is a single handle bathroom faucet. I removed the small cap on handle, then the handle itself, but cannot remove the white plastic shield in the center or the chrome cover around it. Neither will turn and I actually moved the whole sink trying! Any suggestions will be greatly appreciated.
  • Nov 25, 2008, 05:05 PM
    ballengerb1

    Surf this site and see if you can get to your model installation instructions. Installation : Frequently Asked Questions : Delta Faucet
  • Nov 25, 2008, 09:25 PM
    afaroo

    Hello freefowin,

    Open Bob's link it will help you, if you have the model number please post it that we will give the exact details, Thanks.

    John
  • Nov 25, 2008, 11:00 PM
    Milo Dolezal

    Yes, it is hard to remove that white plastic round piece w/o loosening the metal piece. You unscrew the entire metal cone-shaped cup that holds that plastic round piece in. Than, the plastic nut will unscrew easily. Make sure you turned hot and cold water off before you do anything.
  • Nov 25, 2008, 11:52 PM
    afaroo
    1 Attachment(s)

    I am sending you the link below I hope it will help you, Thanks.

    John

  • All times are GMT -7. The time now is 01:58 PM.