Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Heating & Air Conditioning (https://www.askmehelpdesk.com/forumdisplay.php?f=150)
-   -   Bryant furnace shutdown before desired temperature (https://www.askmehelpdesk.com/showthread.php?t=283728)

  • Nov 21, 2008, 05:58 PM
    esgun1974
    Bryant furnace shutdown before desired temperature
    My furnace runs for ten minutes blows heat but shuts off before reaching desired temperature thermostat set for 72 and it is 60 degrees in my house. I turn the thermostat
    Off and then turn it back on and the heat cycles for ten minutes.
  • Nov 21, 2008, 06:07 PM
    letmetellu

    Have you changed your thermostat recently? By that I mean have you installed a new one.
  • Nov 21, 2008, 06:16 PM
    esgun1974

    No the thermostat is 2 yrs old
  • Nov 21, 2008, 06:17 PM
    mygirlsdad77

    Jump r and w at the furnace and see if it stays running until you unjumper r and w. Let me know what you find.
  • Nov 21, 2008, 06:57 PM
    hvac1000
    Brand of thermostat?
    Exact model of thermostat?
  • Nov 21, 2008, 07:38 PM
    esgun1974
    White rodgers model 63123
  • Nov 21, 2008, 08:42 PM
    hvac1000
    Your model number is not listed as per White Rodgers. Try and find the REAL model number.
  • Nov 21, 2008, 09:41 PM
    T-Top
    A dirty return air filter, blower wheel and or evaporator coil can resrict the air flow and make your main limit open up on the furnace causing it to act the same way your talking about.
  • Nov 21, 2008, 10:28 PM
    esgun1974
    Thanks, I washed out the filters on the electric cleaner I have on my furnace I will clean the blower wheel, but the evaporator coil I'm not familer with ?

  • All times are GMT -7. The time now is 12:49 AM.