Our commode does flush empty. All ports are open and we have used a plunger and an auger. The commode does not overflow but paper will not flush down. Is it possible that there is an "air-lock"? How cAN WE FIX OUR "SLUGGISH" TOILET?
|
Our commode does flush empty. All ports are open and we have used a plunger and an auger. The commode does not overflow but paper will not flush down. Is it possible that there is an "air-lock"? How cAN WE FIX OUR "SLUGGISH" TOILET?
I have one that most repair plumbers miss.. Look down at the bottom of the bowl. If there is a small hole, then that is a jet that starts the syphon action. If it's clogged the water will just swirl around and slowly go down leaving solids behind. Take your finger,(UGH! ) and run it around the inside of the opening. Over the years minerals build up and cut down on the syphon (flush) action. If it is rough or you feel build up, take a table knife and put a bend in it to get around the curve in the bowl and chip and scrap it clear. Next take a coathanger and clear out the holes around the rim. They start the swirling action. And last, check the water level in the tank. It should be 1/2" below the top of the over flow tube. And speaking of the overflow tube, Make sure the small 1/8" tube from the ballcock to the white overflow tube is connected so it discharges in it and that it's flowing when the ballcock fills. This is what raises the water level in the bowl. For a good solid flush they all have to work together. Hope this helps and thank you for rating my reply.. Tom
Our toilet does not have a small hole at the bottom of the bowl. It is one of the first "water saver" models. Any other suggestions?
Then you have a gravity toulet where the more water you have in your tank the better the flush. Purchase a closet auger,(see image) and auger the bowl. Good luck, TomQuote:
Originally Posted by samson2
| All times are GMT -7. The time now is 05:54 PM. |