Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Plumbing (https://www.askmehelpdesk.com/forumdisplay.php?f=259)
-   -   Thinset Issue (https://www.askmehelpdesk.com/showthread.php?t=279460)

  • Nov 10, 2008, 10:38 PM
    rip-cord
    Thinset Issue
    What thin set should I use over Keri membrane? Modified or unmodified, latex or not? I get one story at Home Depot to use fortified modified with a polymer and the Keri info recommends non modified.

    I have the membrane up already using a non modified thin set. This is for a shower wall install.

    Thanks
  • Nov 11, 2008, 05:57 AM
    massplumber2008
    I have not used the keri product but I do know that you ALWAYS follow manufacturer's instructions to be sure you don't VOID any kind of warranty.

    If Keri says non-modified.. then use non-modified! I am sure they know their product best!

    Good luck...

    MARK

  • All times are GMT -7. The time now is 01:28 PM.