Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Tools & Power Equipment (https://www.askmehelpdesk.com/forumdisplay.php?f=334)
-   -   Model #310-430A Snow thrower (https://www.askmehelpdesk.com/showthread.php?t=278794)

  • Nov 9, 2008, 09:36 AM
    Mike1109
    Model #310-430A Snow thrower
    My snow thrower is not throwing snow.. the auger turns and it runs well.. but it does not throw snow.. is there a part I should be looking at??
  • Nov 9, 2008, 12:29 PM
    KISS

    That has got to be an odd problem.

    Wet snow doesn't throw very well at all, so keep that in mind. All it does is clog.

    Friction, caused by rust in the snow path will have some effect too, but it would have to be really bad.

    The auger not moving fast enough would be my best guess. This could be caused by anything slipping like belts, clutch, transmission etc.
  • Nov 10, 2008, 11:37 AM
    OutdoorDist

    Hi Mike,
    I am not familiar with that model number, but if it is a "two stage" thrower, the auger pushes the snow to the rear, where the impeller fan blows the snow out of the chute. LOOK (do not feel) if the impeller is turning. If it is not, there is probably a separate belt for the drive.

    Hope this helps,
    Victor
  • Dec 21, 2010, 09:19 AM
    Sharpy1
    The snow thrower is a single stage. And not an efficient one. It clogs easy because it has no second stage propeller to push the snow out the shoot. My suggestion , is to increase the motor speed, I do that with mine.
  • Dec 21, 2010, 05:13 PM
    crigby

    Hi,
    To see the manual, try the link:
    PDF Manual Web Archive
    And use 310430A for the model and just 1 as the serial number.
    Peace,
    Clarke

  • All times are GMT -7. The time now is 01:55 AM.