My Maytag Insignia dryer will not stay running after pushing the start button. After 30 seconds or so the dryer shuts itself off. Have tried cleaning all lint traps/filters that I could find. Any help would be appreciated.

AdamO - Have you checked the high temp Protectopr that is on the out side of the heating element case, You will need a volt-ohm meter to check it to see if it is good:: another thing to check is the door switch, it may be going bad, whedn it goes completely bad it will not run at all until it is replaced :: IF this is not the cause then test the thermostate switch, start switch, and timer switch
Good luck and GOD BLESS ::F.B.E.