Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Appliances (https://www.askmehelpdesk.com/forumdisplay.php?f=157)
-   -   Neptune Dryer Stopped Heating M/N MDG4000BWW (https://www.askmehelpdesk.com/showthread.php?t=27441)

  • Jun 7, 2006, 03:51 PM
    grega223
    Neptune Dryer Stopped Heating M/N MDG4000BWW
    Hi, Please Help! My girlfriends dryer stopped heating suddenly. It's a Maytag Neptune Model MDG4000BWW. There is no heat whatsoever. I am hoping there is something inherent with this model that I can start with. Any suggestions will be greatly appreciated. Thanks.
  • Jun 7, 2006, 04:13 PM
    applguy
    First, you must remove the front panel. Open the door and remove 2 screws on each side of the opening; 2 in the door hinges and 2 directly opposite from them. Then close and latch the door and pull on the top corners of the panel and it pivots down, then lift off the bottom brackets. Then start the dryer (making sure it's not set for air fluff or no heat) and watch the ignitor to the left side of the burner tube. Report back if it glows or not. Also you might include the first two numbers of the serial number so I can make sure we're talking about the same series machine.
  • Jun 7, 2006, 05:15 PM
    grega223
    Thank you very much. I will do that tomorrow and report back!
  • Jun 13, 2010, 10:51 AM
    afecci

    I have a maytag gas dryer
    MDG4000BWW the heat comes on but only for a few minuets the goes out. If you wait about 1hr then try again the heat will come on the go out in a few minuets
  • Sep 19, 2010, 07:42 AM
    chuck7641
    Yes glows gas valve opens main burner comes on once cycled off< glows again but valve does not open

  • All times are GMT -7. The time now is 11:32 AM.