Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Windows (https://www.askmehelpdesk.com/forumdisplay.php?f=237)
-   -   Print Spooler will not run (https://www.askmehelpdesk.com/showthread.php?t=272266)

  • Oct 22, 2008, 07:29 AM
    bobmaitland
    Print Spooler will not run
    I am SA for a Windows 2003 Server, used to add network printers. I was adding a printer, and a software program started installing on it's own(HP 1510). I tried to stop it, and now my print spooler will not start. Also, on my printers page under the start menu, the printers that were on it are not visible.
  • Oct 22, 2008, 03:55 PM
    seahwk83

    Have you gone into services to see if service is started?

    Click start, run and type services.msc and hit enter

    Go down the list till you see print spooler and right click, properties

    Click the start button and then in the drop down menu, change to automatic and click Apply at bottom

    Close services and see if you can install your printers or they appear

    Just make sure print spooler is started in the services.msc menu

  • All times are GMT -7. The time now is 01:11 PM.