Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Heating & Air Conditioning (https://www.askmehelpdesk.com/forumdisplay.php?f=150)
-   -   Intertherm forced air furnace (https://www.askmehelpdesk.com/showthread.php?t=271165)

  • Oct 19, 2008, 03:58 PM
    RANGER2002
    Intertherm forced air furnace
    I have one of these units intertherm forced air furnace... my question is I have melted wires on two connections for the heating elements and the fan blows slower on heat cycle and when switching to air it speeds up and also one of the connection is and has a little arching I turned it off... is the sequencer bad or a nother problem:(
  • Oct 19, 2008, 06:41 PM
    hvac1000
    Fan is supposed to run slower in the heat cycle usually.

    You will need to cut off and install new wire ends. This will cause an arc since the wires are not tight to the connection.

  • All times are GMT -7. The time now is 11:11 AM.