We recently replaced our facet in our 1st bathroom shower after we replaced them the 2nd bathroom sink has no pressure

Quote:

---

Originally Posted by bus 10-03

we recently replaced our facet in our 1st bathroom shower after we replaced them the 2nd bathroom sink has no presure

---

Chances are good that you've dislodged some crud built up in the pipe walls and now it's blocking either the aerator, (see image) or the inlet ports of the faucet cartridge. Unscrew the aerator from the spout and check and clean the screens. Turn the water on without the aerator. If you got a strong stream then you need go no farther. If there's still a problem click on back with the brand name of the faucet and whether it's one handle or two knobs. Good luck, Tom

Checked the aculater yes it was clogged now the cold works fine but the hot is still slow the brand name is glacier bay and it has two faucets hot and cold thanks