Oil furnace doesn't stop running
Today our Lennox OF7-140M oil furnace continued to run long after the temperature was well above thermostat setting. I toyed with the dial thermostat to be sure it was behaving normal. I eventually turned off the furnace with the breaker.
After the furnace had set off for several hours I turned the thermostat well below the room temporature and then flipped on the breaker. The only noise I could hear at the furnace sounded like the pump, I waited a few minutes to see if any other noises happened. I went to the thermostat and turned it above the room temperature to see if that would change anything, it didn't. I then turned the thermostat back below room temperature and the pump noise stopped - all quiet. I turned the thermostat back above room temperature but nothing happens.
Again, I waited a while and then checked the push-button reset on the furnace, then turned the thermostat up. The furnace does not come on. Any ideas?