I want to put in a shower at my work, but I don't want to do any large construction work rip opening walls or the floor.

I asked a guy at home depot and he showed me some shower/faucet with a connector to be able to connect it to where the sink pipe is. As long as I buy connector pipes that fit, is it okay?

Also, there's no drain so would that actually require some construction to rip open the floor. I know I would probably have to find another pipe to drain the water with. Is there any other viable solution for the drain without heavy work.

Thank you.

SCK...

There is an option...

Check it out at www.saniflow.com

You will be searching for the SANISHOWER SYSTEM

Basically, you'll need to build a platform to put shower on and then drain it into the sanishower pump. From the pump you will need to have the drain connected into a nearby drain pipe. You will also need to provide a vent for the pump and shower.

Check into the sanishower and then get back with any questions.

I will be back around 7:00 or 8:00 tonight (eastern time).

Good luck...

MARK