Wireless adapter will not renew ip address

What have you tried doing?

Quote:

---

Originally Posted by ScottGem

What have you tried doing?

---

I tried it on two other computers at my place and it did the same thing

TRy restarting your computer then reconnect to the network , you can also do a power cycle on your router by turning it off for 20 seconds...

Quote:

---

Originally Posted by marked

TRy restarting your computer then reconnect to the network , you can also do a power cycle on your router by turning it off for 20 seconds....

---

Okay, I have done all that. Maybe it is because it is a refurbished in China, NetGear adapter that I got on sale at TigerDirect without a NetGear serial number on it. It is not supported by NetGear or Rogers Portable High Speed Internet or D-Link.

Hence my question in this forum.

Thanks for your input, much appreciated.

No problem, if that is the case just access your router setup page and do some changes on its wireless settings like, changing the ssid, channel and disable also the wireless security and try to connect to that new network...

Quote:

---

Originally Posted by marked

No problem, if that is the case just access your router setup page and do some changes on its wireless settings like, changing the ssid, channel and disable also the wireless security and try to connect to that new network...

---

Okay, how do you get to the router setup page? I just had to reload XP and lost the address...

Quote:

---

Originally Posted by thewxvan

Okay, how do you get to the router setup page? I just had to reload XP and lost the address............

---

Can you tell me what is the brand and model of your router>>so I can help you better:)

Quote:

---

Originally Posted by marked

Can you tell me what is the brand and model of your router>>so I can help you better:)

---

D-Link, DI-524

Quote:

---

Originally Posted by thewxvan

D-Link, DI-524

---

Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser. In the picture above the address bar has Google in it. Just replace all of that with the ip address of your router. By default the ip address should be set to 192.168.0.1.

You should see a box prompting you for your username and password. Enter your username and password now. By default the username is admin, and the password is blank. Click the Ok button to log in to your router.
Click the Advanced button near the top of the page then there you can change all the wireless settings...

Quote:

---

Originally Posted by marked

Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser. In the picture above the address bar has Google in it. Just replace all of that with the ip address of your router. By default the ip address should be set to 192.168.0.1.

You should see a box prompting you for your username and password. Enter your username and password now. By default the username is admin, and the password is blank. Click the Ok button to log in to your router.
Click the Advanced button near the top of the page then there you can change all the wireless settings...

---

Okay all running now
Thank you

Quote:

---

Originally Posted by thewxvan

Okay all running now
Thank you

---

No problem, don't forget to rate/accept the solution...