I have a Hampton Bay Exterior Motion Sensor Wall Lantern light. Model 248-523, Bar code 0-46335-90429-3. The light has two slide switches, one on each side of its base. I am missing the installation instructions and would like to know how to set the slide switches so I can have the light operate properly for me. With the house power on and when motion is detected at night I would like to have the light turned on for a reasonable period and then automatically turn off. I do not want the light on during daylight hours. Any advice would be appreciated.

With the wall switch in the "ON" position, flick the switch twice back to the "ON" position... this will keep the light on for 8 hours.

With the wall switch in the "ON" position, flick the switch twice back to the "ON" position... this will keep the light on for 8 hours.

I have two Hampton motion detector lamps. Model #'s 7622 and 7643. I can find no information for them [instructions etc... ]. How do I find these?