Thanks, I intend to use the transfer switch wired into the main panel to power up 6 circuits in the event of a power failure. What I need to know, given the configuration as stated, is what do I need to do to the one end of the power cord to get it to work with the 240v blade type receptacle on the generator. The cord is a male twistlock 4-wire, that I thought I could cut off and wire into a new 3-prong male blade type plug. Do I still need to make up an adapter plug to stick in one of the 110v receptacles or not, if I incorporate the white and green wires together on the new plug

THis needs to be posted on the original thread about the topic.