Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Crafts (https://www.askmehelpdesk.com/forumdisplay.php?f=83)
-   -   Gare Ceramic Molds (https://www.askmehelpdesk.com/showthread.php?t=258705)

  • Sep 9, 2008, 07:31 PM
    butterflydream
    Gare Ceramic Molds
    Can anyone tell me if Gare ceramic molds can still be purchased? If so, where? Thanks
  • Sep 10, 2008, 02:22 AM
    Clough
    According to what I'm finding online at the site for Gare, it doesn't look like the molds are available anymore. But, that doesn't mean that they can't be found anywhere, though.

    Gare || Products

    What kind of molds are you looking for, please?

    Thanks!
  • Sep 10, 2008, 08:50 AM
    butterflydream
    Quote:

    Originally Posted by Clough
    According to what I'm finding online at the site for Gare, it doesn't look like the molds are available anymore. But, that doesn't mean that they can't be found anywhere, though.

    Gare || Products

    What kind of molds are you looking for, please?

    Thanks!

    I am actually looking for what I believe are two molds... One is mold #2688, a cow add on for the moon mold. I am also looking for this moon mold by Gare as well. Thanks for your help.
  • Sep 10, 2008, 02:50 PM
    Clough
    Here is the link for how you could contact them directly.

    Gare || Our Company/Overview
  • Sep 23, 2008, 03:54 PM
    butterflydream
    According to the owner of Gare, these molds can no longer be purchased. All of the Masters were destryed to prevent the copying of these. Good luck in finding one. I have searched all over and can not locate one.
  • Oct 19, 2009, 06:29 PM
    Nurdreams

    Some people sell their Gare molds on Ebay. You will have to keep trying. I have a lot of them, but not that one. I bought 6000 molds on eBay a while back & Gare was in the LOT of 6000. There are also ways to make your own molds. You start with a clay model & then plaster half in a box & then the other half. Directions are on the internet. Just make sure you do not COPY their mold exactly. It has a copy write.
  • Aug 11, 2010, 09:24 PM
    Clough
    Thread is now very old and archived so no longer visible on the listing of currently active threads.

    Thread is starting to attract piggybacked questions.

    Thread is now CLOSED.

  • All times are GMT -7. The time now is 06:03 PM.