I have a bryant furnace and air conditioning unit (about 20 years old) and the blower needs to be shut off manually (does not work in the Auto setting) all of a sudden. Replaced the thermostat (Total Line thermostat), still having the same problem. The air unit outside will continue to run but the blower will not run on the Auto setting. I was just curious if this could be the resistor. Any suggestions...

You need a blower fan relay if so equipped. Call a Bryant dealer to obtain the part. You will need your model number.

This is a message from Dbryant0427 at Ask Me Help Desk ( https://www.askmehelpdesk.com/ ). The Ask Me Help Desk owners cannot accept any responsibility for the contents of the email.

To email Dbryant0427, you can use this online form:
https://www.askmehelpdesk.com/sendme...ember&u=404300

OR, by email:
Mailto:[email protected]

This is the message:

Hvac1000, I just wanted to say "thanks" for the response. Dbryant0427