HI:)

I was just wondering if anyone had a remote code, to an Akai LQ26, for a Remotec BW0392 remote? :)

Akai codes: 0051 0301 0671 0741 0851 0871 0991 1001 1491 2371 2391 2551 2751 2791

You may setup the URC by the following code entering instructions.
1. Refer to the DEVICE CODE LIST, look up the 4-digit Device Code which
Corresponds to the brands of your A/V equipment. If there are more than
One Device Code listed under your brand, try from the first code.

2. Press a desired Device Mode Key
3. Hold down “ CH+ ” and “ VOL– ” on the URC together simultaneously for 2
Seconds until the indicator lights up.

4. Use the number keys to enter your 4-digit Device Code, the indicator
Should go out immediately.

Turn on your device (e.g. TV), try the function keys on the URC. If your device
(e.g. TV) responds to your invoked function correctly, you have entered the
Right Device Code. Otherwise, repeat the above setup instructions with the
Rest available Device Codes until your device (e.g. TV) responds to your invoked
Function, and most keys work correctly.

Let me how it works

Quote:

---

Originally Posted by BlakeCory

Akai codes: 0051 0301 0671 0741 0851 0871 0991 1001 1491 2371 2391 2551 2751 2791

You may setup the URC by the following code entering instructions.
1. Refer to the DEVICE CODE LIST, look up the 4-digit Device Code which
corresponds to the brands of your A/V equipment. If there are more than
one Device Code listed under your brand, try from the first code.

2. Press a desired Device Mode Key
3. Hold down “ CH+ ” and “ VOL– ” on the URC together simultaneously for 2
seconds until the indicator lights up.

4. Use the number keys to enter your 4-digit Device Code, the indicator
should go out immediately.

Turn on your device (e.g. TV), try the function keys on the URC. If your device
(e.g. TV) responds to your invoked function correctly, you have entered the
right Device Code. Otherwise, repeat the above setup instructions with the
rest available Device Codes until your device (e.g. TV) responds to your invoked
function, and most keys work correctly.

Let me how it works

---

Thanks for the quick answer :)
I've tried all this codes, but no one seems to work. So now I'm not sure what to do. Is this all the existing codes? :)

These are the codes used for that model remote according to the website.

Link to the manual:
http://www.remotec.com.hk/photos/sof...manual%203.pdf

Page 23