No hot water is coming into my washer. I have checked the filters, confirmed that the water hose is on correctly and the hot water is turned on. The washer on fills with cold water, not warm or hot.

If the hot water is working in the rest of the house, and you definitely have selected a hot or warm cycle on the washing machine, and you are positive the hot water valve is on you mite have a bad selector switch or solenoid switch that controls the flow of hot water. What make and model is the machine that you have?

If all other you confirm is OK then the water inlet valve is bad. About a $35.00 part and not hard to replace

It is a maytag neptune

I found the water inlet valve that you may need on the link attached, just make sure that the model numbers are compatible to the one that you have.Maytag Water Valve Solenoid 205613 - $9.48