My clutch quit working, no signs of slipping or nothing. I was told it was probably the slave cylinder so I replaced it and nothing so I replaced the master cylinder and it still didn't work. So I took it to a local repair shop he pulled the tranny and found the arm that holds the trow out bearing was broken, so he replaced the clutch and arm ($1300.00) now it is back together and it still doesn't work. So he replaced the slave cylinder again and now is going to replace the master cylinder again. I don't understand what would cause the arm to break and why with only 69,000 miles. I have had or seen vehicles with a lot more miles not have issues. Something doesn't seem right, and the bill keeps adding up and it still is not fixed.

Could the problem be they just don't know how to bleed the system properly? If so, have them try a power bleeder. Any air in the system can be disastrous.