The red wire running from the contactor to the hard start capacitor
Keeps burning. Replace the spade and it works for a while.
How can I troubleshoot this? Thanks
![]() |
The red wire running from the contactor to the hard start capacitor
Keeps burning. Replace the spade and it works for a while.
How can I troubleshoot this? Thanks
Either the spade on the capacitor is not clean so that a good soild connection is created when the spade connector is slid onto it, or the capacitor is defective inside.
Either insure the connection is good, or replace the cap.
All times are GMT -7. The time now is 10:51 AM. |