 |
I have a vintage single-handle Standard shower valve that is leaking. The plumber tells me that Standard was very high-end in its day, and there aren't any replacement parts available. The house was built in 1929, and I still have the pedestal sink, tub and toilet. If I can't find the repair kit for the shower valve, the second choice is to tear out the vintage tile and wall. Any suggestions where to find the replacement valve? What was the seal material inside this valve?
This wouldn't be "American Standard" would it? Back to you, Tom
No, Standard came before American Standard. My house and bathroom are 1929 vintage, and that is too old to be American Standard. The marks on the toilet, sinks and eschutcheon on the shower valve are imprinted with the word "Standard".
That sounds like a contradiction in terns. Do you mean a three piece faucet, two valves and a spout? What's leaking, what part do you need, washer, seat, stem packing?Quote:
Originally Posted by Stoli
No, what I mean is that I have one, single-handle shower valve. There is one faucet (or water spout) with a diverter valve for shower or tub delivery of water. The name on the escutcheon is "Standard", the manufacturer. The handle on the valve turns clockwise for hot water, and turns counterclockwise for cold and off. There is a single stem style valve. The plumber tells me that "Standard" plumbing fixtures were very high-end fixtures in their day, and so there aren't that many replacement parts available, if any. The plumber doesn't want to take out the stem of the valve until he knows that he has the replacement part if removing the valve makes the leaking worse. The alternative is to remove a wall of beautiful vintage tile that matches the orchid-color tub, pedestal sink and toilet and replace the entire valve assembly instead of just replacing the valve stem, which is leaking.
I don't see where he has any choice. What's he got to lose? Google doesn't recognize the Standard Corporation or the shower valve and if he can't replace the "O" rings he's going to hafta replace the shower valve in the end anyhow.Quote:
The plumber doesn't want to take out the stem of the valve until he knows that he has the replacement part if removing the valve makes the leaking worse.
If it comes to that you can take out the wall behind the tile and replace the shower valve and save your tile. Sorry but if I were your plumber I would have at least opened up the valve just to see what I had to deal with. Good luck, TomQuote:
The alternative is to remove a wall of beautiful vintage tile that matches the orchid-color tub, pedestal sink and toilet and replace the entire valve assembly instead of just replacing the valve stem, which is leaking.
Could you post a picture of that valve.
The tile around the shower is in a "U" shape, and there is tile on both sides of the wall. The toilet sets on the other side of the "U" shaped wall. What the plumber is saying is that I should have my ducks in a row BEFORE taking out the valve if taking the valve out for inspection makes the leak worse or breaks. In his opinion, he could remove the valve to see what the seal inside is, but if removing the valve makes the leak worse, he doesn't want to turn the water off to the whole house while he searches for a valve, which he doesn't think exists. In the event of the worse case scenerio he wants me to find a tile contractor that can cut and preserve the tile so that he can replace the whole valve assembly. I am hoping to avoid this scenerio If you would like to send me an e-amil address, I can send a photo. Do you want the photo with the eschution off?
Post picture buy clicking "Go Advance" below, click Manage attachments, browse for picture then, open. Click upload. There is a size limitation, if upload fails because of size use Paint to reduce size. JPEG is best format.
Dear Stoli,
I have the same issue and the same plumbing. The house was build in 1939. All the plumbing parts are stamped with "Standard". My shower/bath consist of a shower head, bath facet, a one arm shower diverter, and two separate knobs (hot & cold) below the shower diverter that controls the bath facet.
As a result of leaking from the shower head, I opened up the shower diverter to investigate. Inside the shower diverter I discovered a screw like device attached directly to the one arm controlling water flow. At the end of this screw like device I found two separate plugs (hot & cold) nestled into cradled slots. When the diverter is closed these plugs fit into the water supply lines (opposite when open) to shut off the water. I found that the rubber bushing on these plug were worn allowing water to escape into the diverter chamber and ultamtely out of the shower head when closed. I bought flat rubber washers at Home Depot and slide them over the old bushings on the plugs. I used silicone to seal up the diverter chamber when I was finished. It would appear that this is working when the diverter is closed for now. No leaks of any type reported.
I love to know where I can purchase old "Standard" plumbing parts. Anyone... My search as turned up nothing...
| All times are GMT -7. The time now is 07:48 PM. |