Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Appliances (https://www.askmehelpdesk.com/forumdisplay.php?f=157)
-   -   Jenn air dishwasher won't run (https://www.askmehelpdesk.com/showthread.php?t=246479)

  • Aug 7, 2008, 02:07 PM
    jreber
    Jenn air dishwasher won't run
    My Jenn Air dishwasher model JDB65 isn't running.

    The problem began when it ran, but water wouldn't drain out. There's no clog in the drain line. Now it won't start or anything, like it's got no power. The power switch is on and the circuit breaker is not tripped.

    About a year we paid for a service repair visit for a similar problem. My wife remembers the technician doing something behind the lower panel (under the main door) that was a fairly simple fix. I've opened the panel but can't find anything that looks wrong.
  • Aug 7, 2008, 03:00 PM
    hkstroud
    If you have the front panel removed, close door and make sure that the door interlock mechanism is causing electrical switch to make contact.
  • Aug 8, 2008, 10:19 AM
    jreber
    As best I can tell, the door interlock is working. Guess it's time to call somebody
  • Aug 8, 2008, 10:45 AM
    esquire1
    Move the float switch up and down. Many times they will stick or get something lodged under them and this will shut the power off.
  • Aug 8, 2008, 08:36 PM
    jreber
    OK, tried that, thanks, no help. There's no electrical to the unit whatsoever. I think there's usually one of the 3 red lights on, but I can't get any light on at all.

    Power sources all checked. (switch and circuit breaker)

    It might be the door latch mechanism, not sure
  • Aug 17, 2008, 11:18 AM
    AndrewJC
    Please let us know how this turned out. We have exactly the same symptoms you cite. Running out of ideas here :) Thanks!
  • Aug 17, 2008, 12:32 PM
    hkstroud
    Check electrical connections where house wireing is connected to dishwasher. If you have front panel removed you should be able to temporarily bypass door interlock Door interlocks usually break both sides of circuit.

  • All times are GMT -7. The time now is 12:27 AM.