My old Weed Eater runs at about 1/2 speed when I have it at full choke. When I go to move it off full choke it just dies out. I wonder about how many turns that the throttle screw should be set from fully tight. What other suggestion might you have. I cleaned out the carb filter, which was rather clean already. I ran it for about 1/2 hour this morning at 1/2 speed on full choke but when I went to close the choke some it would stall out. I thank you for any information that you might have..

Thanks Hgnpiper

:) :( :confused:

Quote:

---

Originally Posted by hgnpiper

My old Weed Eater runs at about 1/2 speed when I have it at full choke. When I go to move it off full choke it just dies out. I wonder about how many turns that the throttle screw should be set from fully tight. What other suggestion might you have. I cleaned out the carb filter, which was rather clean already. I ran it for about 1/2 hour this morning at 1/2 speed on full choke but when I went to close the choke some it would stall out. I thank you for any information that you might have..

Thanks Hgnpiper

---