Code 41 on Bryant air handler
Equipment: Bryant Variable Spd 4-Way Multipoise Furnace Model 315AAV060110 package with Bryant Condensing Unit Mod 38HDC060-321. Unit in Florida and issue with cooling operation. Problem start: Odor elec burn at registers. Powered off unit and called repair. Tech did shallow/sloppy diagnostic work and simply installed new motor and motor module, and control board. Tech could not get to run at all and finally apologized and said I would have to call another company. I started applying readings from the Installation, Start-up, Operating, and Service and Maintenance Instructions, including the troubleshooting algorithm. I have been successful getting the unit to cool and have the blower start. CONTINUED PROBLEM: Air handler starts but does not seem to ramp up to high blower speed. Last attempt to run, the unit ran for some 12 minutes and stopped for some seconds and then came back on for 5 minutes before stopping the second time and giving me the flashing code #41. This is the code which it was showing before I called for the service tech. Recommendations for where to look and/or action to take now before calling another service company?