While my son was playing an online game, the monitor went blank and the "no signal" message came up. I checked the cable and monitor - both good. On start up, the computer does not beep. Any ideas?
![]() |
While my son was playing an online game, the monitor went blank and the "no signal" message came up. I checked the cable and monitor - both good. On start up, the computer does not beep. Any ideas?
Turn the computer off, wait about five minutes.
When you turn it back on, watch the cooling fan to see if it starts, or starts briefly and then stops.
If this happens, you will more than likely need a new power supply, at least.
Quote:
Originally Posted by progunr
The cooling fan starts, and stays on.
With a no signal it would be one of two things, the monitor itself or the video card
If you have access to another monitor, plug that it in to see if it works, if it does it is the monitor that went bad
If another known working monitor has same problem, it would more than likely be the video card
To see if video card, you would need to get another known working video card and replace the one in the system now and try you r original monitor to see if that is the issue
If same thing again, try another mointor on the new video card
If both instances do not work, it would be the system board - but you are really looking at the monitor or the vdeo card it is attached to
Post back if any above do not work and if you have an onboard video adapter, try to get another video card and plug it into one of the pci slots if avail
Basicall, testing one of the 2 for problems, video card or monitor
| All times are GMT -7. The time now is 09:22 PM. |