Hi,

I have a kitenchef fridge that is dripping water from the top side of the fridge compartment (traditional freezer on top style). It appears to be coming from an assembly containing a plastic (condensate?) Currently, I have increased the freezer temp to 9.I checked similar qtn about kenmore fridge but this don't seem to have the two screws you speak of, nor does the freezer floor appear as if it would come off.

I don't know the model no of my fridge!

Any tips on DIY repairs would be great as I am not one to quickly dive into appliance repair, but would like to save a few bucks if possible.

Thanks in advance.

It is best to keep the temperature in the mid range. Like 1 through 10 set it between 4 to 6.
If you have it up in the coldest selection then you could end up freezing the freon and it will act like it isn't even on.
Also if you have a setting that is for humidity control try seeing what it does if you switch it to another setting.

Does this assembly have a plastic tube coming out the bottom?