Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Marriage (https://www.askmehelpdesk.com/forumdisplay.php?f=197)
-   -   Building a trellis (https://www.askmehelpdesk.com/showthread.php?t=238955)

  • Jul 18, 2008, 12:50 PM
    newslady08
    Building a trellis
    Hi there!

    Does anyone know a good (read: pretty) way to hang chiffon from our trellis for our outdoor wedding? It's a 2x2 wooden box on 7 foot tall.

    We're going to attach a flower spray about half way up each side.

    Thank you!
    **** link removed** FC
  • Jul 18, 2008, 01:17 PM
    newslady08
    Yes, I'm new to this... so I messed up :( I'm sorry! Can I just upload a pic to this page?
  • Jul 18, 2008, 01:48 PM
    bushg
    here is jrebels instrutions from another post. Hope it helps.

    Hi there! As requested I will gladly share instructions on how to post images. I am an "A to Z" person so forgive if these instructions sound too elementary. I have to have a step by step for myself.

    Once you have scanned your photos, save them as a .jpg file on your computer. You should have a file perhaps “MY PICTURES" where you can save images. You will see “My Documents”, “My Music”, “My Pictures”, etc. Best to save in "My Pictures" as a .jpg file.

    To Resize: Bring up "MY PICTURES" folder where your image is saved. Left click on image once (this chooses it, does not open it) then right click on it. Run your cursor over "OPEN WITH", it should show you several choices...if you see Microsoft Photo Editor, left click to open. Your image will show up in that program on your screen. At the top of that screen, you will see File, Edit, View, Image, etc. Left click on IMAGE, it should have a drop down box giving options, left click on "RESIZE" There will be a box that appears that shows the size of your image. On the right side it will show UNITS.....on the drop down box you can choose inches or pixels, choose pixels. On this site, when you choose "GO ADVANCED", that is where you can add the image and to do so, the image cannot be larger than 750 pixels. (You can use most any photo program to resize).

    Once you have done this, PLEASE go to “File” and choose "SAVE AS"...you can name that image the same as original but add the word at the end as “resized”. That way you retain the larger image but also have one you can post. If you want the image to be fairly large, you can go with the 750 pixels, I have used 600 but generally choose 400. That is just personal preference. Make sure the largest dimension whether height or width does not exceed 750 pixels.

    If I have not left out a step in the instructions, this should allow you to resize your image to allow you to post using "Go Advanced" on the "Answer this Question" box in which I am typing.

    Ok, I am operating on the assumption that you have now resized your photo, saved it in a file folder and are ready to post.

    On "Answer this Question: click on "Go Advanced". Type whatever description, discussion or details you want the viewer to see in the first box then scroll down (do not submit yet), you will see “Additional Options” the first part will have boxes with check marks in them. Make sure the first three are checked. Scroll down, the next box will say "Manage Attachments". Left click on that. A box will come up that says "Manage Attachments" First box will say upload file from your computer with a "Browse Button". Left click on Browse button. Box will come up: Choose File
    Look in: (on this one, you scroll to find the folder that holds your image, open it, then left click to select image you have resized. Click Open. It will place the information of location of said image, Left Click on upload. Wait just a few moments. When it is finished, X out that screen, you will be on "Additional Options" area and it will show just above where it says "Manage Attachments" which file you just attached. Then Scroll down, left click "Submit Answer". This should then show text you typed in first box and below that, image you selected and uploaded. I sure hope I haven't left out a step. If I have, we can get back on track another way. I will help in anyway I can.

    It took me awhile and the patience of other posters helping me to learn how to post images. Best to you! If this seems a little confusing, I suggest you copy and past to a Word Document and then print it out. Refer to it (provided I got it typed crorectly) as you go.

    post by jrebel
  • Jul 18, 2008, 05:17 PM
    Fr_Chuck
    The reason your myspace link did not work was you have your myspace page set to private, so unless you have a person approved to see your myspace page they are not allowed to see it.

    So if you want to use your link ( I removed it for now) you can change your myspace settings to make your pages public

  • All times are GMT -7. The time now is 12:53 PM.