[F]
No water goes into the ice maker. Replaced water valve to no avail. Red LED light does work.
Fill tube isn't frozen. HELP!
Thanks

Do you have a filter in place?
Usually typing in your model number will provide info, your number didn't, Verify model number:
Parts & Accessories | Shop & Find Lawn & Garden, Appliance Parts at Sears Parts Direct | SearsPartsDirect.com from Sears

But is there any water at all going into the ice maker ?
If water is coming out of the tap, and - if installed - the water filter is OK, than the pipe inside the ice maker feeding the unit is blocked.

:)

Quote:

---

Originally Posted by Stratmando

Do you have a filter in place?
Usually typing in your model number will provide info, your number didn't, Verify model number:
Parts & Accessories | Shop & Find Lawn & Garden, Appliance Parts at Sears Parts Direct | SearsPartsDirect.com from Sears

---

No haven't replaced the filter since the first one so it's out. But ice maker has been working for 1 1/2 yrs without it. I know the part number doesn't come up, tried to put it in on the 'fix it part search. It's the same as the pictured one for Kenmore, Module type ice maker.

Quote:

---

Originally Posted by Credendovidis

But is there any water at all going into the ice maker ?
If water is coming out of the tap, and - if installed - the water filter is ok, than the pipe inside the ice maker feeding the unit is blocked.

:)

---

No water at all and no filtered installed. Didn't replace it. Pipe inside unit? How would one chk that?

Could be the solenoid that controls water flow, if voltage is present and valve doesn't open, it is bad.

Quote:

---

Originally Posted by Stratmando

Could be the solenoid that controls water flow, if voltage is present and valve doesn't open, it is bad.

---

Where is that part located?

Follow the water line in, it should be the first thing it goes to.

Quote:

---

Originally Posted by Stratmando

Follow the water line in, it should be the first thing it goes to.

---

OK, he changed the solenoid, wasn't it,however did the tes, T to H. nothing. Would that keep the water from flowing? He wants to just buy a new one, but... what if it's a different part that's not included. Yikes:confused:

Maybe no power to solenoid. I would test before replacing.
If you have water at inlet on solenoid, and voltage is applied and no water comes out, it is bad.
If water is present and voltage is now applied and water exits solenoid valve then it is good.

Reset your filter if light is red and your ice maker will 'generally' work again. I learned the hard way.