Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Heating & Air Conditioning (https://www.askmehelpdesk.com/forumdisplay.php?f=150)
-   -   Disconnected compressor wiring (https://www.askmehelpdesk.com/showthread.php?t=229313)

  • Jun 21, 2008, 06:37 PM
    wrathjen
    Disconnected compressor wiring
    I was doing some remodeling and a wire that I thought didn't go anywhere was actually connected to my outdoor unit. And of course, I didn't write down how it was wired since I was positive the wire wasn't connected anymore thinking it went to an old secondary thermostat. I have a Bryant heat pump, blower/furnace with e-heat and thermostat.

    The thermostat and blower are still connected as follows:
    Thermostat - blower
    W - white wire
    Y
    G - gray wire
    R - red wire
    O/W2
    C - brown wire

    The wires coming inside are connected to C, Y, R, O. How would they connect to my thermostat/furnace wiring.

    Thank you in advance
  • Jun 21, 2008, 10:53 PM
    hvac1000
    1 Attachment(s)
    Quote:

    Originally Posted by wrathjen
    I was doing some remodeling and a wire that I thought didn't go anywhere was actually connected to my outdoor unit. And of course, I didn't write down how it was wired since I was positive the wire wasn't connected anymore thinking it went to an old secondary thermostat. I have a Bryant heat pump, blower/furnace with e-heat and thermostat.

    The thermostat and blower are still connected as follows:
    thermostat - blower
    W - white wire
    Y
    G - gray wire
    R - red wire
    O/W2
    C - brown wire

    The wires coming inside are connected to C, Y, R, O. How would they connect to my thermostat/furnace wiring.

    Thank you in advance

    This might help.
  • Jun 22, 2008, 09:10 AM
    wrathjen
    Quote:

    Originally Posted by wrathjen
    I was doing some remodeling and a wire that I thought didn't go anywhere was actually connected to my outdoor unit. And of course, I didn't write down how it was wired since I was positive the wire wasn't connected anymore thinking it went to an old secondary thermostat. I have a Bryant heat pump, blower/furnace with e-heat and thermostat.

    The thermostat and blower are still connected as follows:
    thermostat - blower
    W - white wire
    Y
    G - gray wire
    R - red wire
    O/W2
    C - brown wire

    The wires coming inside are connected to C, Y, R, O. How would they connect to my thermostat/furnace wiring.

    Thank you in advance

    Thank you for your response. I tried the simplest of connections and connected C-C, Y-Y, R-R, O/W2-O. The fan inside did not turn on in auto but does in manual and the compressor outside still does not turn on for heat or cool.

    Any thoughts?

  • All times are GMT -7. The time now is 11:38 AM.