I recently changed my water supply lines under the sink, because they were leaking, so I decided to replace my kitchen sprayer also. Since I have changed the lines and the sprayer, there in no water at all coming from the hot or the cold, only from the sprayer which has pretty good pressure. It was hard enough to get the sprayer off between a double sink, now I wish I hadn't replaced it at all. The water pressure was fine before, it was just my water supply lines that were old and leaky. How do I get water back to my faucet?

[email protected]

Quote:

---

Originally Posted by lisap48125

I recently changed my water supply lines under the sink, because they were leaking, so I decided to replace my kitchen sprayer also. Since I have changed the lines and the sprayer, there in no water at all coming from the hot or the cold, only from the sprayer which has pretty good pressure. It was hard enough to get the sprayer off between a double sink, now I wish I hadnt replaced it at all. The water pressure was fine before, it was just my water supply lines that were old and leaky. How do I get water back to my faucet?

[email protected]

---

Sounds like you have disturbed some minerals built up on the pipe walls and now they're clogging the valve. Try this. Remove the aerator from the3 spout and check and clean the screens. If that don't get it click on back with the brand name, type, one handle or two knobs and its age. Regards, Tom