My 1999 Accord Stalls while stoping!! There was a recall on the ignition switch which I got replaced. So while driving when I stop at a signal, the car stalles.so then I start the car and hold the key and drive. I was told to check the ignition problem by starting the car then wiggling the car keys... and I noticed that my car stalls just after little movement in the keys. So what should I get changed the ingnition switch or just the electrical component. Help. Thanks

Honda Ignition Switch Replacement:

1. Disconnect negative battery cable.
2. Remove dashboard lower cover and knee bolster.
3. Disconnect 5-P connector from under-dash fuse box and 7-P connector from main wire harness.
4. Remove steering column covers.
5. Insert key and turn it to "0".
6. Remove two screws from switch and replace.

Quote:

---

Originally Posted by txgreasemonkey

Honda Ignition Switch Replacement:

1. Disconnect negative battery cable.
2. Remove dashboard lower cover and knee bolster.
3. Disconnect 5-P connector from under-dash fuse box and 7-P connector from main wire harness.
4. Remove steering column covers.
5. Insert key and turn it to "0".
6. Remove two screws from switch and replace.

---

Can you please tell me what is the part number I should get for honda accord 1999 lx and about how much they cost?

Thanks

Check this out:

While we find your parts, please enter your ZIP Code at PartsAmerica.com